Agilent Technologies E6380-90073 manual CDANalyzerADC meas cmnd CDANalyzerADC?

GPIB Command Dictionary

MEASure subsystem

:CDANalyzer:ADC <meas cmnd> :CDANalyzer:ADC?

IS-95 Only mode. These commands set/query the ADC measurement in the code domain analyzer.

This measurement utilizes the Number Measurement Syntax, but does not use the :METer command.

Syntax

MEAS:CDAN:ADC <meas cmd>

!See “Number Measurement Syntax” on page 283. MEAS:CDAN:ADC?

Example

MEAS:CDAN:ADC?

Screen/field equivalent

MEAS:CDAN:ADC? reads the ADCfs measurement field on the Gain menu of the CODE DOM screen when the CDMA standard is set to “IS-95 Only”.

:CDANalyzer:CARRier:FEEDthrough <meas cmnd> :CDANalyzer:CARRier:FEEDthrough?

IS-95 Only mode. These commands set/query the carrier feedthrough measurement on the code domain analyzer.

This measurement utilizes the Number Measurement Syntax, but does not use the :METer command.

Syntax

MEAS:CDAN:CARR:FEED <meas cmd>

!See “Number Measurement Syntax” on page 283. MEAS:CDAN:CARR:FEED?

Example

MEAS:CDAN:CARR:FEED?

Screen/field equivalent

MEAS:CDAN:CARR:FEED? reads the Car FT measurement field on the CODE DOM screen when the CDMA standard is set to “IS-95 Only”.

226 Chapter 1