![](/images/new-backgrounds/1182399/182399199x1.webp)
GPIB Command Dictionary
CANalyzer subsystem
:ACP:POWer:OFFSet <real number> :ACP:POWer:OFFSet?
This command sets the frequency offset used when making adjacent channel power measurements. The setting designates the frequency offset from the center frequency at which the measurement is made. Valid values are 100 kHz to 3 MHz.
Syntax
CAN:ACP:POW:OFFS <real number>
CAN:ACP:POW:OFFS?
Example
CAN:ACP:POW:OFFS 100 kHz !sets the freq. offset to 100 kHz
CAM:ACP:POW:OFFS? | !returns freq. offset setting |
Screen/field equivalent
CAN:ACP:POW:OFFS controls the ACP Offset field on the CDMA ANALYZER screen.
:ARM
This command arms the measurements based on the type of measurement (single or continuous), qualifying events, and triggering events.
To put the CDMA analyzer in single triggering mode, use the
TRIG:MODE:RETR SING command.
For continuous triggering, use TRIG:MODE:RETR REP.
Syntax
CAN:ARM!arms the CDMA analyzer measurements
Example
TRIG:MODE:RETR SING | !sets | the | trigger mode to Single |
CAN:ARM | !arms | the | measurement |
Screen/field equivalent
CAN:ARM controls the Arm Meas subfield of the Analyzer field.
100 | Chapter 1 |