GPIB Command Dictionary
AFG2ENCoder subsystem
:AMPSTACS:BUSY <string> :AMPSTACS:BUSY?
These commands set/query the busy/idle status information included in the signaling sequence.
•‘Idle’ sets the busy/idle bits of the forward control channel information to indicate an idle state.
•‘Busy’ sets the busy/idle bits of the forward control channel information to indicate an busy state.
•‘WS Delay’ (word sync delay) prevents a busy/idle change until the word sync information has been received and a defined number of delay bits has been counted. The delay is set with the AFG2:AMPS:BUSY:DEL command.
•‘1stBitDly’ (first bit delay) causes the busy/idle bit to be set after a bit has been received and a defined number of delay bits has been counted. The delay is set with the AFG2:AMPS:BUSY:DEL command.
This command requires that the AFG2:AMPS:CHAN command specifies ‘Cntl’.
Syntax
AFG2:AMPS:BUSY ‘Idle’
‘Busy’
‘WS Delay
‘1stBitDly’
AFG2:AMPS:BUSY?
Screen/field equivalent
AFG2:AMPS:BUSY controls the Busy/Idle field on the SIGNALING ENCODER screen when the Mode field is set to
Chapter 1 | 75 |
