GPIB Command Dictionary
CANalyzer subsystem
:PATH:GAIN <string> :PATH:GAIN?
These commands set/query the gain of the CDMA analyzer. This command will only be enabled when autoranging is turned off (CAN:PATH:MODE ‘Hold’).
This command may conflict with the code domain analyzer’s settings CDAN:PATH:GAIN and CDAN:PATH:MODE. For example, if autoranging is turned off (‘Hold’) in the CDMA analyzer and turned on in the Code Domain Analyzer (‘Auto’) the ‘Hold’ setting will always override the ‘Auto’ setting. When autoranging is turned off, setting either analyzer’s gain will automatically change the other’s to the same setting.
Use the CAN:POW:GAIN command when making an average power measurement.
Syntax
CAN:PATH:GAIN ‘0 dB’ ‘6 dB’ ‘12 dB’ ‘18 dB’ ‘24 dB’ ‘30 dB’ ‘36 dB’
CAN:PATH:GAIN?
Screen/field equivalent
CAN:PATH:GAIN sets the lower subfield of the Gain field of the CDMA ANALYZER screen. This subfield is only selectable when the upper subfield is set to Hold.
106 | Chapter 1 |
