GPIB Command Dictionary
MEASure subsystem
:OSCilloscope:MARKer:LEVel:AM <meas cmnd> :OSCilloscope:MARKer:LEVel:AM?
These commands set/query the AM depth measurement at the oscilloscope’s marker position. For this measurement to be valid, you must have AM Mod or AM Demod chosen as the audio input (see AFAN:INP on page 59).
This measurement utilizes the Number Measurement Syntax, but does not use the :METer command.
Syntax
MEAS:OSC:MARK:LEV:AM <meas cmd>
!See “Number Measurement Syntax” on page 283. MEAS:OSC:MARK:LEV:AM?
Example
MEAS:OSC:MARK:LEV:AM?
Screen/field equivalent
MEAS:OSC:MARK:LEV:AM? reads the Lvl measurement field on the SCOPE screen. The AF Anl In field on the AF ANALYZER screen must be set to AM Mod or AM Demod to measure AM depth in this field.
272 | Chapter 1 |
