
GPIB Command Dictionary
AFG2ENCoder subsystem
:NAMPsNTACs:SEND
:NAMPsNTACs:SEND?
This command sets/queries the type of data sent when the AFG2:SEND command is used.
•Selecting ‘Message’ sends the contents of the forward voice message (AFG2:NAMP:FVC:MESS <string>).
•Selecting ‘DST’ causes the digital signaling tone sequence to be output. The DST sequence that is sent is the inverse of the sequence entered in the DSAT message (AFG2:DSAT:MESS <string>).
Syntax
AFG2:NAMP:FVC:SEND ‘Message’
‘DST’
AFG2:NAMP:FVC:SEND?
Screen/Field Equivalent
AFG2:NAMP:FVC:SEND controls the FVC Message/DST field on the SIGNALING ENCODER screen when the Mode field is set to
:NAMPSNTACS:STANdard <string> :NAMPSNTACS:STANdard?
These commands set/query the radio standard for the encoder.
Syntax
AFG2:NAMP:STAN ‘NAMPS’
‘NTACS’
AFG2:NAMP:STAN?
Screen/field equivalent
AFG2:NAMP:STAN controls the Standard field on the SIGNALING ENCODER screen when the Mode field is set to
98 | Chapter 1 |