GPIB Command Dictionary
CDANalyzer subsystem
:PNINcrement <real number> :PNINcrement?
These commands set/query the PN increment. If you know the PN incrment, enter it with this command to speed the PN offset search. If you do not know the increment, enter a 1.
This command utilizes the :INCR command of the “Real Number
Setting Syntax” on page 299.
Syntax
CDAN:PNIN <real number>!values from 1 to 256
CDAN:PNIN? | !returns the value of the PN increment |
Screen/field equivalent
CDAN:PNIN controls the PN Incrment field on the CODE DOM screen when the CDMA standard is set to
:PNMode <string> :PNMode?
These commands set/query the PN offset mode.
•‘Auto’ is used to calculate the system’s PN offset if it is unknown. When ‘Auto’ is selected, the CDAN:PNIN command can be used to enter a PN increment and speed the PN offset calculation.
•‘Manual’ is used to enter a known PN offset. When ‘Manual’ is selected, the PN offset is entered using the CDAN:PNOF command.
Syntax
CDAN:PNM ‘Auto’
‘Manual’
CDAN:PNM? !returns the PN Offset mode
Screen/field equivalent
CDAN:PNM controls the Find PN field on the PN Setup menu of the CODE DOM screen, when the CDMA standard is set to
126 | Chapter 1 |
