GPIB Command Dictionary
MEASure subsystem
:SANalyzer:MARKer[:NORMal]:FREQuency <meas cmnd> :SANalyzer:MARKer[:NORMal]:FREQuency?
These commands set/query the frequency at the marker on the spectrum analyzer’s trace.
This measurement utilizes the Number Measurement Syntax, but does not use the :METer command.
Syntax
MEAS:SAN:MARK:NORM:FREQ <meas cmd>
!See “Number Measurement Syntax” on page 283.
MEAS:SAN:MARK:NORM:FREQ? !returns real value
Example
MEAS:SAN:MARK:NORM:FREQ? !returns the value
Screen/field equivalent
MEAS:SAN:MARK[:NORM]:FREQ? reads the Freq measurement field on the SPEC ANL screen.
:SANalyzer:MARKer[:NORMal]:LEVel <meas cmnd> :SANalyzer:MARKer[:NORMal]:LEVel?
These commands set/query the RF level at the marker on the spectrum analyzer’s trace.
This measurement utilizes the Number Measurement Syntax, but does not use the :METer command.
Syntax
MEAS:SAN:MARK:NORM:LEV <meas cmd>
!See “Number Measurement Syntax” on page 283.
MEAS:SAN:MARK:NORM:LEV? !returns real value
Example
MEAS:SAN:MARK:NORM:LEV? !returns the value
Screen/field equivalent
MEAS:SAN:MARK[:NORM]:LEV? reads the Lvl measurement field on the SPEC ANL.
280 | Chapter 1 |
