
GPIB Command Dictionary
CONFigure subsystem
:SPOR10SPORT10SB10SP10:MODem:MODE <string> :SPOR10SPORT10SB10SP10:MODem:MODE?
These commands set/query the modem mode.
Syntax
CONF:SPOR10:MOD:MODE ‘Disable’
‘Ignore’
‘Answer’
‘Dial Back’
CONF:SPOR10:MOD:MODE? !returns quoted string
Screen/field equivalent
CONF:SPOR10:MOD:MODE controls the Modem Mode field of the MODEM CONFIGURE screen when the Serial Port field is set to Port 10.
:SPOR10SPORT10SB10SP10:MODem:CALL:ORIGinate
This command causes the modem to place a call using the dialing string entered with the CONF:SPOR10:MOD:CONN:NUMB command.
Syntax
CONF:SPOR10:MOD:CALL:ORIG
Screen/field equivalent
CONF:SPOR10:MOD:CALL:ORIG controls the Orignate subfield of the Call field on the MODEM CONFIGURE screen when the Serial Port field is set to Port 10.
:SPOR10SPORT10SB10SP10:MODem:CALL:DISConnect
This command causes the modem to disconnect from the call in progress. It also cancels any pending call origination retries (CONF:SPOR10:MOD:CONN:RETRy). This field is inactive when CONF:SPOR10:MOD:MODE ‘Disable’ command is used.
Syntax
CONF:SPOR10:MOD:CALL:DISC
Screen/field equivalent
CONF:SPOR10:MOD:CALL:DISC controls the Disconnect subfield of the Call field on the MODEM CONFIGURE screen when the Serial Port field is set to Port 10.
178 | Chapter 1 |