Agilent Technologies E6380-90073 manual CDANalyzerIS2000MARKerNOISe?, CDANalyzerIS2000MARKerPOWer?

GPIB Command Dictionary

MEASure subsystem

:CDANalyzer:IS2000:MARKer:NOISe?

IS-2000 only. This query returns the Marker Level for the Noise, when the Power & Noise measurement is active. The return will be a floating point number.

Syntax

MEAS:CDAN:IS2000:MARK:NOIS?

Screen/field equivalent

MEAS:CDAN:IS2000:MARK:NOIS? reads the Noise Lvl field in the RH column of the Marker menu on the CODE DOMAIN screen when the CDMA standard is set to “IS-2000” and measurement is Power & Noise.

:CDANalyzer:IS2000:MARKer[:POWer]?

IS-2000 only. This query returns the Marker Level, in dB, when the Channel Power Mode is inactive. The return will be a floating point number.

Syntax

MEAS:CDAN:IS2000:MARK[:POW]?

Screen/field equivalent

MEAS:CDAN:IS2000:MARK[POW]? reads the Marker Lvl field of the CODE DOMAIN screen when the CDMA standard is set to “IS-2000” and the CD pwr unit field on the Reference menu is set to Rel.

:CDANalyzer:IS2000:PNumber:OFFSet?

:CDANalyzer:IS2000:PNUMber:OFFSet?

IS-2000 only. This query returns the measured PN offset of the Pilot signal as an integer value.

Syntax

MEAS:CDAN:IS2000:PN:OFFS?

MEAS:CDAN:IS2000:PNUM:OFFS?

Screen/field equivalent

MEAS:CDAN:IS2000:PN:OFFS? and MEAS:CDAN:IS2000:PNUM:OFFS? queries the PN Ofs measurement field on the CODE DOMAIN screen when the CDMA standard is set to “IS-2000”.

240 Chapter 1