GPIB Command Dictionary
AFG2ENCoder subsystem
:AMPSTACS:BUSY:DELay <integer>
These commands set/query the number of bits that are counted before a busy/idle bit changes from the idle state to the busy state. This function is used in conjunction with the WS Delay and 1stBitDly settings of the AFG2:AMPSTACS:BUSY command. This command also requires that the AFG2:AMPS:CHAN command is specifies ‘Cntl’.
This command utilizes only the :INCR command of the “Integer
Number Setting Syntax” on page 206.
Syntax
AFG2:AMPS:BUSY:DEL <real number>
Screen/field equivalent
AFG2:AMPS:BUSY:DEL controls the B/I Delay field on the
SIGNALING ENCODER screen when the Mode field is set to
:AMPSTACS:CHANnel <string> :AMPSTACS:CHANnel?
These commands set/query the channel type. ‘Cntl’ selects the forward control channel (FOCC). ‘Voice’ selects the forward voice channel (FVC).
Syntax
AFG2:AMPS:CHAN ‘Cntl’
‘Voice’
AFG2:AMPS:CHAN?
Screen/field equivalent
AFG2:AMPS:CHAN controls the Channel field on the SIGNALING
ENCODER screen when the Mode field is set to
76 | Chapter 1 |
