GPIB Command Dictionary
RFANalyzer subsystem
RFANalyzer subsystem
:ATTenuator <string> :ATTenuator?
These commands set/query the amount of input attenuation in the path of the selected input port. CONF:ATT:MODE ‘Auto’ overrides this command.
Syntax
RFAN:ATT ‘0 dB’ ‘5 dB’ ‘10 dB’ ‘15 dB’ ‘20 dB’ ‘25 dB’ ‘30 dB’ ‘35 dB’
RFAN:ATT?
Screen/field equivalent
RFAN:ATT controls to the lower subfield of the Input Atten field on the RF ANALYZER screen.
:ATTenuator:MODE <string> :ATTenuator:MODE?
These commands set/query the RF autoranging mode.
CONF:ATT:MODE ‘Hold’ overrides this command.
Syntax
RFAN:ATT:MODE ‘Auto’
‘Hold’
RFAN:ATT:MODE?
Screen/field equivalent
RFAN:ATT:MODE corresponds to the Auto/Hold subfield of the Input Atten field on the RF ANALYZER screen
Chapter 1 | 303 |
