Honeywell DR4300 manual Procedure for Replacing the Chart, Chart hub, Pens to the chart

DR4300 Circular Chart Recorder

6.2 Replacing the Chart

Procedure

Refer to Figure 6-1and follow the procedure in Table 6-1to replace the chart.

		Table 6-1 Procedure for Replacing the Chart
Step			Action
1	Turn off the power to the recorder, then open the door.
2	Pull up on the pen lifter to raise the pen(s) from the chart plate.
3	Lift the chart from the hub, and slide it from under the pen(s) to remove it from the chart plate.
4	Slip the new chart under the pen lifter, pens and time index; and press the chart into place over
	the chart hub.
5	Turn the chart until the desired time line on the chart is aligned with the time index on the chart
	plate and pen 1 before closing the locking clip on the hub. Push down on the lifter to return the
	pen(s) to the chart.
	CAUTION: Do not try to rotate the hub
6	Close the door and apply power.

			Notch for	Open	Pen
		Ink	pen tip
				clip
Pen arm	Clip	cartridge			tip
Time index
Pen lifter
					Large chart
					hub
				24214

Figure 6-1 Replacing the Chart and Ink Cartridge

158 DR4300 Circular Chart Recorder Product Manual 12/03