Honeywell DR4300 manual Power Wiring Models Without CE Mark

Installation

Main PCA	Main PCA
Pen 2	Pen 1

7

4

TB2

7

TB1

TB2

L

5 N

TB6

24821

2

3

		1	It is the user’s responsibility to provide a switch and
			non-time delay (North America), quick-acting, high
			breaking capacity, Type F, (Europe) 1/2 A, 250 V
			fuse(s) or circuit-breaker as part of the installation.
1		2	PROTECTIVE EARTH (Ground): Grounding of
			this recorder shall be in accordance with National
			and Local electrical codes.
L2/N	L1/H	3	NOISELESS (Clean) EARTH (Ground): To minimize
			electrical noise and transients that may adversely
100 Vac to 240 Vac
			affect the recorder, connection of the recorder terminal

(located in the rear of the case) to a local earth (ground), using a No. 11 (4 mm2) braided copper conductor, is required.

4For 2 Pen Recorder/Controller, connect ac power to TB1 of Pen 2 PCA. Supply connections must be made at TB6, if installed.

5 Wire ac power to this connector if installed.

Figure 2-9 Power Wiring – Models Without CE Mark

12/03 DR4300 Circular Chart Recorder Product Manual 29