Honeywell manual DR4300 Circular Chart Recorder Step Operation Press Result, Disp

DR4300 Circular Chart Recorder

Step	Operation	Press		Result
4	Select other function							key will
			•	Successive presses of the		FUNC
	parameters	FUNC
				sequentially display the other function prompts of the
				set up group you have selected.
			•	Stop at the function prompt that you want to change,
				then proceed to the next step.
5	Change the value or		•	These keys increment or decrement the value or
	selection			selection that appears for the function prompt you
				have selected.
		or	•	See Subsection 4.3.4 Configuration Tips for
				instructions to increase or decrease value quickly.
			•	Change the value or selection to meet your needs.
			• If the display flashes, you are trying to make an
				unacceptable entry.
6	Enter the value or selection		•	This key selects another function prompt.
		FUNC
		or	• This key selects another set up group.
		SET
			The value or selection you have made will be entered
		UP
			into memory after another key is pressed.
7	Exit Configuration		This exits configuration mode and returns the recorder
		DISP	to the same state it was in immediately before you
			entered configuration mode. Any changes made during
			the configuration session are stored when configuration
			mode is exited.
8	2-Pen Recorders						key to select INP 2
		FUNC	For 2-pen recorders, press		FUNC
			for display and return to step 1 to configure the
			parameters for pen 2.

84 DR4300 Circular Chart Recorder Product Manual 12/03