Honeywell DR4300 manual INP EU Engineering Units of Input Signal, SEC factory setting, Tot Dp

DR4300 Circular Chart Recorder

Lower Display	Upper Display	Parameter
Prompt	Range of Setting	Definition
	or Selection
INP EU		ENGINEERING UNITS OF INPUT SIGNAL
	NONE [factory setting]	NONE—Disables EU conversions and disables TOT EU and
	CuFt	TOT DP functions.
		Cubic Feet
	GAL	Gallons
	CuMt	Cubic Meters
	LITR	Liters
	AcFt	Acre-Feet
	HMTR	Hectare-Meters
RATE		RATE OF INTEGRATION—This parameter is used to select
		the desired rate of integration.
	SEC [factory setting]	SECOND—EU (Engineering Units) per second
	MIN	MINUTE—EU per minute
	HOUR	HOUR—EU per hour
	DAY	DAY—EU per DAY
	MDAY	MDAY—Millions of units per day
TOT EU		ENGINEERING UNITS OF TOTALIZED VALUE
	NONE [factory setting]	NONE—Disables EU conversions.
	CuFt	Cubic Feet
	GAL	Gallons
	CuMt	Cubic Meters
	LITR	Liters
	AcFt	Acre-Feet
	HMTR	Hectare-Meters
TOT DP	8888 [factory setting]	TOTALIZED VALUE DECIMAL PLACES—This parameter is
	888.8	used to select the number of decimal places of the displayed
	88.88	TOTAL value. This selection will be overridden if the SCALER
		selection is not equal to 1.
SCALER		TOTALIZER SCALE FACTOR—The totalizer displays the
		current totalized flow value (up to six digits maximum). The
		scaling factor selected here is applied to the totalized value
		when it is displayed.
	1 (displays as E0)
	[factory setting]
	10 (displays as E1)
	100 (displays as E2)
	1000 (displays as E3)	1E4 equals 1 times 10 4 (10,000)
	1E4 (displays as E4)
	1E5 (displays as E5)	1E5 equals 1 times 10 5 (100,000)
	1E6 (displays as E6)	1E6 equals 1 times 10 6 (1,000,000)
	1E7 (displays as E7)	1E7 equals 1 times 10 7 (10,000,000)
	1E8 (displays as E8)	1E8 equals 1 times 10 8 (100,000,000)

92 DR4300 Circular Chart Recorder Product Manual 12/03