Honeywell manual DR4300 Circular Chart Recorder Step Action Graphic

DR4300 Circular Chart Recorder

Step	Action	Graphic
9	To fine-tune the alignment of the pen, press the raise switch	See Figure 3-1 for the location of SW3
	SW4 or lower switch SW3 until the pen tip is aligned with the	and SW4.
	100 % line on the chart.
	Approximately 10 seconds after the last press of the raise or
	lower switch the pen will move downscale as described in
	Step 2.
10	To exit the pen alignment cycle place SW5 to the run position
	(toward the bottom of the board). Pen will return to normal
	operation.

170 DR4300 Circular Chart Recorder Product Manual 12/03