Honeywell DR4300 manual Mounting on a 2-inch pipe, Pipe Mounting Procedure

DR4300 Circular Chart Recorder

2.3.4 Mounting on a 2-inch pipe

Refer to Figure 2-5and follow the procedure in Table 2-4to mount your recorder on a 2-inch pipe.

Table 2-4 Pipe Mounting Procedure

Step Action

1Using the eight plastite screws supplied with the pipe mounting bracket kit, attach the two mounting brackets (flat side against the case) to the back of the recorder. Refer to Figure 2-5for location.

2Position the recorder with brackets on the 2-inch pipe.

3Install the U-bolts around the pipe and through the bracket holes. Secure with lockwashers and hex nuts provided.

Washer	Pipe Mounting
	Bracket
Hex Nut	Plastite
	Screw

Rear of Case

U-bolt

24224

Figure 2-5 Pipe Mounting Brackets

20 DR4300 Circular Chart Recorder Product Manual 12/03