Honeywell DR4300 manual Rec.X

						Appendix C - Setpoint Ramp/Soak
						Programming and Operation
Function		Press				Result
Viewing the Number of
Cycles Left for the						input value
Program
	until you see					REC.X
						Number of cycles remaining in the
						setpoint program
						X = 0 to 99
Ending the Program					When the final segment is completed, the “RUN” in the
					lower display either changes to “HOLD” (if configured for
					HOLD state), or disappears (if configured for disable of
					setpoint programming).
					The recorder will operate at the last setpoint achieved by
					the program.
Disable Program
	until you see
	until you see
			or
	until			see
			you
					Exit configuration and program is disabled.

12/03 DR4300 Circular Chart Recorder Product Manual 223