OPERATIONS
Read the manual before operation. Become familiar with this tool, its safety instructions, and its operation before beginning any work. Serious personal injury may result if safety or operational information is not understood or followed.
LUNG/EAR
INJURY HAZARD!
Wear protective equipment when using this tool.
ACCIDENTAL
START HAZARD! Disconnect before service or tool changes.
AIR PRESSURE
HAZARD!
Never exceed 120
PSI.
Impact Wrench
Specifications
Drive Size | 1⁄2" | |
No Load Speed | 7000 RPM | |
Max. Torque | 230 ft/lb (310N.m) | |
Air Inlet | 1⁄4" | |
Air Hose ID | 3⁄8" | |
Operating Air Pressure | 90 PSI | |
Average Air Consumption | ................4 CFM | |
Weight | 5.4 lbs | |
Air Supply
The impact wrench requires 90 PSI to operate correctly. To improve air tool lifespan, use a filter/lubricator/regulator setup shown in Figure 2.
Quick | Quick | Lubricator | |
Connector | Connector | Regulator | |
Your |
|
| Air |
Tool |
|
| Compressor |
Quick |
|
|
|
Coupler |
| Quick |
|
| Air Hose | Filter | |
| Coupler | ||
|
| ||
Figure 2. Installed filter lubricator
regulator.
Otherwise, lubricate the impact wrench daily with a couple drops of pneumatic tool oil directly into the tool's air inlet fitting, as shown in Figure 3, before and after each use.
Figure 3. Manual oiling.
Model H8209 |
