Honeywell DR4300 manual Startup of Recorder with Display and Keypad

Models: DR4300

1 262
Download 262 pages 56.21 Kb
Page 131
Image 131

Configuration, Startup, and Operation of Recorder with Display

4.4 Startup of Recorder with Display and Keypad

4.4.1 Overview

Introduction

This subsection provides procedures and reference information for startup and operation of a recorder having a display and keypad. (For information on operating a recorder that does not have a display and keypad, see Section 3.) This subsection assumes that the recorder has been properly prepared, mounted, and wired in accordance with the instructions in Section 2, and configured as described earlier in this section.

Some of the procedures in this subsection are required only initially; some are required during use. Once the recorder is up and running, operator actions are required infrequently.

WARNING—SHOCK HAZARD

!

 

STARTUP AND MAINTENANCE MAY REQUIRE ACCESS TO HAZARDOUS LIVE CIRCUITS, AND SHOULD ONLY BE PERFORMED BY QUALIFIED SERVICE PERSONNEL. MORE THAN ONE SWITCH MAY BE REQUIRED TO DE-ENERGIZE UNIT BEFORE SERVICING.

12/03

DR4300 Circular Chart Recorder Product Manual

119

Page 131
Image 131
Honeywell manual Startup of Recorder with Display and Keypad, DR4300 Circular Chart Recorder Product Manual 119