Honeywell DR4300 manual Changing the Control Setpoint Procedure

DR4300 Circular Chart Recorder

4.5.2.3 Changing the Control Setpoint

Procedure

The recorder can be set up for control on pen channel 1 and/or 2 as described earlier in this section. Follow the procedure in Table 4-30to change the control setpoints.

Table 4-30 Procedure for Changing the Control Setpoints

Step Operation Press Action/Result

1	Select setpoint for		until you see:.
	the pen 1 channel	DISP		Upper Display
	(input 1).					shows the input value.
				Lower Display
							shows SP and the setpoint
					value for the selected channel.
			to change the setpoint to the desired value.
		or
2	Select setpoint for		Until “INP 2” indicator lights.
	pen 2 (input 2)	FUNC
			until you see:.
		DISP		Upper Display
						shows the input value.
				Lower Display
							shows S2 and the second
					setpoint for the selected
					channel.
			to change the setpoint to the desired value.
		or
3	Return to input 1		to light “INP 1” indicator
	parameters for	FUNC
	display

If remote switch is set to SP2 then DISP will allow setting of second setpoint (S2).

134 DR4300 Circular Chart Recorder Product Manual 12/03