Honeywell DR4300 manual Xx Hh . Mm

DR4300 Circular Chart Recorder

Function		Press			Result
Putting the Program in			until
the Run State
			to toggle from “HOLD” to
				to indicate that the program is running.
Putting the Program in			until
the Hold State
			to toggle from “RUN” to
				to hold the program at the current
			setpoint.
External Hold			If the recorder supports digital inputs, and REMSWn is
			set to HOLD, then when the contact n closes, the
			program will be placed in hold (if the setpoint program is
			running).
			The “hold” in the lower display will be displayed
			periodically in lower case.
			ATTENTION The keypad takes priority over the external
			switch for the RUN/HOLD function.
			Contact reopening runs the program.
External Run			If the recorder supports digital inputs, and REMSWn is
			set to RUN, then when the contact n closes, the program
			will be run (if the setpoint program is enabled).
			The “run n” in the lower display will be displayed
			periodically in lower case.
			ATTENTION The keypad takes priority over the external
			switch for the RUN/HOLD function.
			Contact reopening holds the program.
Viewing the Present
Ramp or Soak Segment					input value
Number and Time
	until you see				XX HH . MM
					Time remaining in the SEGMENT in
					hours and minutes
					XX = 1 to 24

222 DR4300 Circular Chart Recorder Product Manual 12/03