WHAT THIS MANUAL CONTAINS
This is the Operating manual for the HP 6621A through 6624A and 6627A Series of Multiple Output Linear System Power Supplies. It contains information relating to the installation, operation, and programming of these supplies as outlined below. Maintenance and troubleshooting instructions are given in a separate Service Manual (HP Part No. 5957- 6379).
Chapter
Chapter 1 contains a general description of the power supplies as well as instrument specifications and information concerning options and accessories.
Chapter
Chapter 2 contains information to prepare the supply for use. Included in this chapter are power requirements, line voltage conversion, and
Chapter
Chapter 3 contains a brief description of the supply's front panel controls and indicators and describes how to turn on the supply and to check it's operation. An introduction to remote operation over the
Chapter
Chapter 4 contains information about making connections to the supply's output terminals. General operating information is also provided.
Chapter
Chapter 5 contains all of the information required to operate the supply remotely via an
Chapter
Chapter 6 contains instructions on using all of the front panel controls and indicators.
Appendix
Appendix A contains programming steps and procedures that are required to calibrate your power supply. It is recommended that the power supply be calibrated yearly.
Appendix
Appendix B contains Series 200/300 Computer programming examples (in HP extended BASIC language) for your Power Supply's most frequently used functions.
Appendix
Appendix C contains an alphabetical listing of all commands that can be sent to a supply.
Appendix
Appendix D contains a listing and brief explanation of all error codes and messages for all programming and hardware errors.
Appendix E - Manual Backdating
Appendix E contains backdating information for units with Serial numbers lower than those listed on the title page.
6