Table
Error Code | Message | Explanation |
(ERR? query) | (ERR key) |
|
|
|
|
17 | UNCALIBRATED | Unexplained EEPROM error; possibly as the result of incorrect calibration |
|
| procedure. Recalibrate as described in Appendix A. If the problem persists, a |
|
| hardware failure exists (Refer to the Troubleshooting Section in the Service |
|
| Manual). |
18 | CAL LOCKED | Calibration was attempted with the calibration jumper on the |
|
| the lockout position (See Chapter 4 in the Service Manual). Reposition the |
|
| jumper and |
22 | SKIP SLF TST | The self test jumper on the |
|
| Chapter 4 in the Service Manual). Reposition the jumper and carry out |
|
| if this is desired. |
| Table |
Response Code | Explanation |
(TEST? query) |
|
|
|
0 | No errors were detected. |
20 | The timer on the |
| Manual. |
21 | The RAM on the |
| Manual. Note that if this failure occurred at |
27 | The ROM on the |
| Manual. Note that if this failure occurred at |
|
|
Error Codes and Messages | 111 |