Honeywell DR4300 manual SG23RP, Or hour if Rpunit = EU-M Or EU-H Factory setting =, SG24SP, SG24TI

DR4300 Circular Chart Recorder

Lower Display	Upper Display	Parameter
Prompt	Range of Setting	Definition
	or Selection
.
.
.

Continue to configure ramp segments (odd-numbered) and soak segments (even-numbered) through Segments 23 and 24.

.

.

.

SG23RP	0 to 99 hours:0 to 59 min	SEGMENT 23 RAMP VALUE—Enter the ramp time or
	(if RPUNIT = TIME)	ramp value for Segment 23.
	or
	0 to 999 degrees per minute
	or hour (if RPUNIT = EU-M
	or EU-H)
	[factory setting = 0.00]
SG24SP	range depends on setpoint	SEGMENT 24 SETPOINT—Enter the setpoint for
	limits [factory setting = 0]	Segment 24.
SG24TI	0 to 99 hours:0 to 59 min	SEGMENT 24 TIME—Enter the duration for Segment 24
	[factory setting = 0]

220 DR4300 Circular Chart Recorder Product Manual 12/03