Honeywell manual DR4300 Circular Chart Recorder Product Manual 127

					Configuration, Startup, and Operation
								of Recorder with Display
Step	Operation	Press						Action/Result
5	Enter the setpoint			Upper Display
		DISP
								shows the input (PV) value.
				Lower Display
		until
							SP and the setpoint value for
						the selected channel.
			Adjust the setpoint to the value at which you want the
		or	process variable maintained.
6	Select automatic		Until “A” indicator is ON.
		MAN
	mode		The recorder is in Automatic mode.
		AUTO
		RESET	The recorder will automatically adjust the output to
			maintain the process variable at setpoint as tracked by
			the pen trace.
7	Start up Controller		Until INP 2 indicator on left side of display is lit.
	#2	FUNC	For recorders with two control outputs enabled, repeat
			steps 2 to 6 for the second control output, but be sure
			INP “2” indicator is lit instead of INP “1”.
8	Exit Startup		Close the door and monitor the operation.

12/03 DR4300 Circular Chart Recorder Product Manual 127