Honeywell DR4300 Mounting Methods, Introduction, Overview, How to remove knockouts for conduits

DR4300 Circular Chart Recorder

2.3 Mounting Methods

2.3.1 Introduction

Overview

This section provides instructions for mounting the recorder using one of the following methods:

•Flush in a panel (Subsection 2.3.2)

•Flush in a panel for recorders with NEMA4 or Heavy Duty door (Subsection 2.3.3)

•On a 2-inch pipe (Subsection 2.3.4)

[A pipe mounting kit is available (see Section 9 Parts List).]

•On the surface of a wall or panel (see Subsection 2.3.5).

Choose the method that meets your mounting requirements. Use the associated dimension drawings for reference.

How to remove knockouts for conduits

Before you mount the recorder, remove the appropriate plugs in the bottom and/or sides of the recorder case for wire entry via 1/2" (12.7 mm) conduits. Refer to Figure 2-2for plug locations. To see recommended use of conduits for various types of wiring, refer to Figure 2-7and Figure 2-8.

Side View

Bottom View

24211

Figure 2-2 Plug Locations

16 DR4300 Circular Chart Recorder Product Manual 12/03