Eiki 8080 5Connecting a microphone, 6Connecting an external device, 8Connecting external speakers

Basic Operation

5Connecting a microphone	6Connecting an external device
	8080 front panel	External device
	To [AUX IN]	To audio
	Mini plug	output

Connect a monaural dynamic microphone to the [MIC] connector on the front panel. The connector accepts a monaural mini plug (ø3.5mm).

If you are connecting a microphone with a built-in remote switch, connect it to the [MIC] and [REMOTE] connectors.

CAUTION:

•The [MIC] connector is not compatible with a con- denser-type microphone. Be sure to use a dynamic microphone.

Connect the audio output of an external device to the [AUX IN] connector on the front panel of the 8080. The [AUX IN] connector accepts monaural signals via a monaural mini plug (ø3.5mm).

Use an appropriate commercially available cable.

CAUTION:

•You cannot use the [AUX IN] connector and the [MIC] connector simultaneously. If you are using the [AUX IN] connector, remove the microphone from the [MIC] connector.

Basic Operation

7Listening through the headphones

Stereo headphones

8080 right side panel

Standard stereo plug

8Connecting external speakers

Although the 8080 features a built-in speaker, you can also connect external speakers if desired.

Speaker	8080 right side panel	Speaker
(left)		(right)

Connect the standard stereo plug (ø6.3mm) of the headphones to one of the [HEADPHONES] connec- tors on right side.

If your headphones use a stereo mini plug (ø3.5mm), use a commercially available adapter plug.

When you connect headphones, the internal speaker output will be muted.

CAUTION:

•You can connect up to five sets of headphones to the 8080 simultaneously. If you are using multiple headphones, use the same type so that the volume level will be consistent among all headphones.

Use the SPEAKERS [LEFT]/[RIGHT] connectors (which accept monaural ø6.3mm standard plugs) on the right side.

When you connect external speakers, the built-in speaker output will be muted.

CAUTION:

•Be sure to use speakers with an impedance of 4Ω or higher.

11