|
|
| Advanced Playback from a CD or USB Flash Drive | ||
2 Music CD | MP3/WMA (CD/USB) | ||||
Use the [SKIP] buttons to select a | Use the [SEARCH/FOLDER] buttons to select a | ||||
track to program. | folder, then use the [SKIP] buttons to select a track | ||||
|
|
| to program. | ||
|
|
|
|
| |
| MEMORY |
|
|
|
|
|
|
|
|
| |
The selected track number and playback time |
| MEMORY |
| ||
|
|
| |||
appear. | The selected track number and folder number appear. | ||||
3 Press the [PROG.] button.
The selected track is programmed to
MEMORY
4 Continue programming, if necessary.
Repeat steps 2 and 3. You can program up to 25 tracks (up to
5 Press the [PLAY/PAUSE] button.
Playback starts from the track programmed as
| The | MEMORY | indicator turns off and the | PROGRAM | indicator turns on. | |
PROGRAM | ||||||
|
| |||||
| The | PROGRAM | indicator turns on if any track has been programmed. | |||
Checking, deleting and adding programmed tracks
1 Stop playback to cancel the resume function, then press the [PROG.] button.
| The PROGRAM indicator flashes. The track number and |
PROGRAM | PROGRAM the program number appear. Then the playback time or |
| the folder number appears. |
2 Press the [SEARCH] buttons.
Check the programmed tracks by pressing the [SEARCH] buttons repeatedly to increase or decrease the program number.
When you finish checking the tracks, press the [PROG.] button or wait five seconds without operating the unit.
3 To add or delete programmed tracks, press the [STOP/CLEAR] button while checking the pro- grammed tracks.
The MEMORY indicator turns on, and the unit enters programming/deleting mode.
The last programmed track number and its P (Program) number appear.
MEMORY
4 To delete programmed tracks, press the [STOP/CLEAR] button.
Repeatedly pressing the [STOP/CLEAR] button will delete the last programmed track one by one, and the previous program number will appear on the display. When all programmed tracks are deleted, the PROGRAM indicator turns off.
To add a track, repeat the steps described in Steps 2 and 3 in the “Program Playback” section.
5 Press the [PLAY/PAUSE] button.
Program Playback starts from track
CAUTION:
•All programmed data will be cleared when you open the disc cover, disconnect the USB flash drive, or turn off the power to the unit.
•To play back tracks normally, delete all programmed tracks so that the PROGRAM indicator will turn off.
Playback
15
