Recording to a USB Flash Drive
Recording from a Cassette Tape to a USB Flash Drive
1 |
2 x COUNTER |
DIGITAL DISPLAY
REPEAT 1ALL REMAIN RANDOM
PROGRAM
MEMORY
VARIABLE PITCH CONTROL | MIN. SEC. |
25 RANDOM ACCESS PROGRAM | TRACK NO. TIME |
|
AUTOMATIC STOP
PUSH |
|
|
OPEN |
|
|
3 4 | 5 | 2 |
NOTE:
Tracks will automatically be recorded to available space on the drive.
You do not have to locate the appropriate position to record (as you would with a cassette tape).
1Set the Input Select switch to [USB].
2Insert a cassette tape.
See page 16.
3Connect the USB flash drive to the [USB] port.
See page 13.
4Press the USB [REC] button.
The button blinks red, and the unit enters record ready mode.
5Press the [PLAY] button in the tape transport section.
The tape starts playing, and the USB flash drive auto- matically starts to record (the USB [REC] button lights up red).
Tips:
Recording
• Pressing the [PLAY/PAUSE] button during record ready mode will also start recording.
• Pressing the USB [REC] button while recording will place a track mark (track divider) in the position where you pressed the button.
Stopping recording
Press the [STOP/EJECT] button in the tape transport section. Alternatively, press the [STOP/CLEAR] button, then press the [STOP/EJECT] button in the tape transport section.
CAUTION:
• If you press the USB [REC] button while the tape is playing, recording will start immediately.
• Audio will be recorded to the USB flash drive in MP3 format with a bit rate of 128kbps. You cannot change this setting.
•Please refer to page 25 for information on the folders and files that are created during USB recording.
•Changing the volume, tone, or balance during recording will not affect the recording.
19