
CAUTION | Always use the |
| Failure to ensure adequate earth grounding by not using this cord may |
| cause personal injury and/or product damage. |
| This product is designed for use in Installation Category II and |
| Pollution Degree 2 per IEC 1010 and IEC 664 respectively. For indoor |
| use only. |
| This product has autoranging line voltage input, be sure the supply |
| voltage is within the specified range. |
| Ventilation Requirements: When installing the product in a cabinet, the |
| convection into and out of the product must not be restricted. The |
| ambient temperature (outside the cabinet) must be less than the |
| maximum operating temperature of the product by 4° C for every 100 |
| watts dissipated in the cabinet. If the total power dissipated in the |
| cabinet is greater than 800 watts, then forced convection must be used. |
| To prevent electrical shock, disconnect instrument from mains (line) |
| before cleaning. Use a dry cloth or one slightly dampened with water to |
| clean the external case parts. Do not attempt to clean internally. |
Product | CE - the CE mark is a registered trademark of the European Union. A |
Markings | CE mark accompanied by a year indicated the year the design was |
| proven. |
| CSA - the CSA mark is a registered trademark of the Canadian |
| Standards Association. |
35