TP-Link TL-SC3130G manual

¾Notify Type: You can select the notify type among DHCP, Static IP, and PPPoE. When the network settings related to the chosen notify type are changed, an e-mail notification will be sent to inform you of the updated network information of the camera.

¾SMTP Server Name: Type the SMTP server name up to 64 characters, or the IP address of the SMTP server.

¾SMTP Server Port: You can set port number from 1~65535 according to your mail server. The default value is 25.

z SSL: It is Security setting. Checking SSL box if the mail server you use has security restriction.

)Note:

If you use g-mail as your mail server, you should set 587 as your port number and check SSL box.

¾Authentication: Select the authentication required when you send an email.

z Off: Select this if no authentication is necessary when an email is sent.

z On: If authentication is necessary when an e-mail is sent, there are SMPT, POP before SMPT or both three options.

z SMTP: Select this if SMTP authentication is necessary when an e-mail is sent.

z POP before SMTP: Select this if POP before SMTP authentication is necessary when an e-mail is sent. If this option is selected, the IP Notification page will be different as following figure shown.

37