TP-Link TL-SC3130G manual Alarm sending, ¾Alarm

sent according to the alarm detection when Alarm sending of the alarm tab is set to On, the characters standing for the sensor type added to the subject.

¾Message: Type the text of the E-mail up to 384 characters. (A line break is equivalent to 2 characters.)

7.2.2 Alarm sending

Set to send the mail with connection to the alarm detection by the built-in motion detection function. Select On to send the image and file to SMTP server linked with the alarm detection.

¾Alarm sending: Select On to set to send mail with connection to the alarm detection.

¾File attachment: Set whether an image file is attached to the mail sent or not. When On is selected, the image file made by the settings below is attached. When Off is selected, only the message is sent.

¾Image file name: Type the file name you want to assign to the image to attach a mail. You can use up to 10 alphanumeric, - (hyphen) and _ (underscore) for naming.

¾Suffix: Select a suffix to add to the file name

z Date & time: The date & time suffix is added to the Image file name. The date/time suffix consists of lower two-digits of year (2 digits), month (2 digits), date (2 digits), hour (2 digits), minute (2 digits), second (2 digits), and consecutive number (2 digits), thus 14-digit number is added to the file name.

z Sequence number: A consecutive number of 10 digits between 0000000001 and 4294967295 and two fixed digits 00 are added to the Image file name.

z Sequence number clear: Click Clear and the suffix of the sequence number returns to 1.

¾Alarm

z Motion Detection: Click it for using Motion Detection function as a sensor. You can set motion detection function on the motion detection page.

53