TP-Link TL-SC3130G ¾Authentication: Select the authentication required when you send an email

)Note:

If you use g-mail as your mail server, you should set 587 as your port number and check SSL box.

¾Authentication: Select the authentication required when you send an email.

z Off: Select it if no authentication is necessary when an email is sent.

z On: When authentication is necessary an e-mail is sent, select one of the authentication methods from the followings.

¾SMTP: Select it if SMTP authentication is necessary when an e-mail is sent.

¾POP before SMTP: Select if POP before SMTP authentication is necessary when an e-mail is sent.

)Note:

When you set to On, be sure to select either or both SMTP or / and POP before SMTP.

zPOP server name: When the POP before SMTP is selected in Authentication, type the POP (receiving mail) server name up to 64 characters, or type the IP address of the POP server. This setting is necessary when the SMTP server which sends e-mails performs authentication using the POP user account.

zUser name, Password: Type the user name and Password of the user who has the mail account. This setting is necessary when the SMTP server which sends e-mails performs authentication.

¾Recipient e-mail address: Type the recipient e-Mail address up to 64 characters. You can specify up to three recipient E-mail addresses.

¾Administrator e-mail address: Type the Administrator e-Mail address up to 64 characters. This address is used for reply mail and sending system messages from the SMTP server.

¾Subject: Type the subject/title of the e-Mail up to 64 characters. With respect to mail which is

52