GPIB Command Dictionary
AFG2ENCoder subsystem
:FILTer:MODE <string> :FILTer:MODE?
These commands set/query the premodulation filter’s control.
We recommend that you leave this setting at its default setting (filter mode OFF is the power up default state.) See the :FILTer command on page 69 for more information about the premodulation filters.
Syntax
AFG2:FILT:MODE ‘ON’
‘OFF’
AFG2:FILT:MODE?
Screen/field equivalent
AFG2:FILT:MODE has no screen/field equivalent.
:FM <real number> :FM?
This command sets FM modulation deviation if the AFG2:DEST is ‘FM’.
This command utilizes the “Real Number Setting Syntax” on page 299.
Syntax
AFG2:FM <real number>
AFG2:FM?
Screen/field equivalent
AFG2:FM controls the AFGen2 To field (lower subfield) on the RF
GENERATOR screen when the upper subfield is set to FM.
70 | Chapter 1 |
