Agilent Technologies E6380-90073 manual NAMPsNTACsFVCRATE real number NAMPsNTACsFVCRATE?

GPIB Command Dictionary

AFG2ENCoder subsystem

:NAMPsNTACs:FVC:RATE <real number> :NAMPsNTACs:FVC:RATE?

These commands set/query the data rate of the encoded message.

This command utilizes the “Real Number Setting Syntax” on page 299 but does not use the :STATe command.

Syntax

AFG2:NAMP:FVC:RATE <real number>

AFG2:NAMP:FVC:RATE?

Screen/field equivalent

AFG2:NAMP:FVC:RATE controls the Data Rate field on the

SIGNALING ENCODER screen when the Mode field is set to

NAMP-NTAC, and the Channel field is set to Voice.

:NAMPsNTACs:FVC:AM <real number> :NAMPsNTACs:FVC:AM?

This command sets/queries the data level when the AFG2:DEST ‘AM’ command is used. The data level units are %.

This command utilizes the “Real Number Setting Syntax” on page 299.

Syntax

AFG2:NAMP:FVC:AM

AFG2:NAMP:FVC:AM?

Screen/field equivalent

AFG2:NAMP:FVC:AM controls the Data Level field when AFGen2 To field is set to AM on the SIGNALING ENCODER screen when the Mode field is set to NAMP-NTAC, and the Channel field is set to Voice.

96 Chapter 1