
GPIB Command Dictionary
SANalyzer subsystem
:MARKer:DELTa:NPEak
This command sets the delta marker at the next peak of the spectrum analyzer display.
Syntax
SAN:MARK:DELT:NPE
Screen/field equivalent
SAN:MARK:DELT:NPE controls the Marker To, Next Peak field on the Marker menu of the SPEC ANL screen when the Norm/Delta field is set to Delta.
:MARKer:DELTa:NPLevel <real number> :MARKer:DELTa:NPLevel?
These commands set/query the level of the next peak signal at the delta marker.
This command utilizes the “Real Number Setting Syntax” on page 299, but does not use the :STATe command.
Syntax
SAN:MARK:DELT:NPL <real number>
SAN:MARK:DELT:NPL?
Screen/field equivalent
SAN:MARK:DELT:NPL controls the Level field on the SPEC ANL screen when the Norm/Delta field is set to Delta.
:MARKer:DELTa:PEAK
This command moves the delta marker to the highest peak of the signals on the spectrum analyzer display trace.
Syntax
SAN:MARK:DELT:PEAK
Screen/field equivalent
SAN:MARK:DELT:PEAK controls the Marker To, Peak field on the Marker menu of the SPEC ANL screen when the Norm/Delta field is set to Delta.
316 | Chapter 1 |