Agilent Technologies E6380-90073 manual Ampstacssatam real number AMPSTACSSATAM?

GPIB Command Dictionary

AFG2ENCoder subsystem

:AMPSTACS:MESSage:DATA1 <string> :AMPSTACS:MESSage:DATA2 <string> :AMPSTACS:MESSage:DATA1?

:AMPSTACS:MESSage:DATA2?

These commands set/query FOCC Stream A and Stream B message data. Like the filler data, the message information can only be input in full (seven digit) lines. Also, message streams A and B must have the same number of lines in them.

To use this command, AFG2:AMPS:CHAN must be set to ‘Cntl’.

Syntax

AFG2:AMPS:MESS:DATA1 <string>

AFG2:AMPS:MESS:DATA2 <string>

AFG2:AMPS:MESS:DATA1?

AFG2:AMPS:MESS:DATA2?

Screen/field equivalent

AFG2:AMPS:MESS controls the Message fields for FOCC Stream A and Stream B on the SIGNALING ENCODER screen when the Mode field is set to AMPS-TACS. These fields are displayed only when the Channel field is set to Cntl.

:AMPSTACS:SAT:AM <real number> :AMPSTACS:SAT:AM?

These commands set/query the SAT level when the AFG2:DEST ‘AM’ and AFG2:AMPS:CHAN ‘Voice’ commands are used. The SAT level units are %.

This command utilizes the “Real Number Setting Syntax” on page 299.

Syntax

AFG2:AMPS:SAT:AM

AFG2:AMPS:SAT:AM?

Screen/field equivalent

AFG2:AMPS:SAT:AM controls the SAT Level field when AFGen2 To field is set to AM on the SIGNALING ENCODER screen when the Mode field is set to AMPS-TACSand the Channel field is set to Voice.

Chapter 1 81