Agilent Technologies E6380-90073 manual

GPIB Command Dictionary

MEASure subsystem

:DEC:NAMP:DTMF:LOW:FREQuency:ABSolute <meas cmnd> :DEC:NAMP:DTMF:LOW:FREQuency:ABSolute?

These commands set/query the frequency of the low tone in the DTMF pair. The MEAS:DEC:NAMP:DTMF:LOW:DISP ‘Freq’ command must be used to display the absolute frequency of the low tone.

Syntax

MEAS:DEC:NAMP:DTMF:LOW:FREQ:ABS

!See “Multiple Real Number Setting Syntax” on page 282

MEAS:DEC:NAMAP:DTMF:LOW:FREQ:ABS? !returns up to 19 real values

Screen/field equivalent

MEAS:DEC:NAMP:DTMF:LOW:FREQ:ABS? reads the Lo Tone column on the SIGNALING DECODER screen when the Mode field is set to NAMP-NTAC, the Measure field is set to DTMF, and the upper subfield of the Lo Tone field is set to Freq, and the Channel field is set to Voice.

:DEC:NAMP:DTMF:LOW:FREQuency:ERRor <meas cmnd> :DEC:NAMP:DTMF:LOW:FREQuency:ERRor?

These commands set/query the frequency error of the low tone in the DTMF pair. The MEAS:DEC:NAMP:DTMF:LOW:DISP ‘Frq Err’ command must be used to display the frequency error of the low tone.

Syntax

MEAS:DEC:NAMP:DTMF:LOW:FREQ:ERR

!See “Multiple Real Number Setting Syntax” on page 282

MEAS:DEC:NAMP:DTMF:LOW:FREQ:ERR? !returns up to 19 real values

Screen/field equivalent

MEAS:DEC:NAMP:DTMF:LOW:FREQ:ERR? reads the Lo Tone column on the SIGNALING DECODER screen when Mode field is set to NAMP-NTAC, the Measure field is set to DTMF, and the upper subfield of the Lo Tone field is set to Frq Err, and the Channel field is set to Voice.

Chapter 1 267