![](/images/new-backgrounds/1182399/182399155x1.webp)
GPIB Command Dictionary
AFG2ENCoder subsystem
:AMPSTACS:DATA:LEVel <real number> :AMPSTACS:DATA:LEVel?
These commands set/query the data level when the AFG2:DEST ‘Audio Out’ command is used first. The data level units are mV.
This command utilizes the “Real Number Setting Syntax” on page 299.
Syntax
AFG2:AMPS:DATA:LEV
AFG2:AMPS:DATA:LEV?
Screen/field equivalent
AFG2:AMPS:DATA:LEV controls the Data Level field when AFGen2 To field is set to Audio Out on the SIGNALING ENCODER screen when the Mode field is set to
:AMPSTACS:DATA:RATE <real number>
These commands set/query the data rate of the encoded message.
This command utilizes the “Real Number Setting Syntax” on page 299 but does not use the :STATe command.
Syntax
AFG2:AMPS:DATA:RATE
Screen/field equivalent
AFG2:AMPS:DATA:RATE controls the Data Rate field on the
SIGNALING ENCODER screen when the Mode field is set to
78 | Chapter 1 |