GPIB Command Dictionary
SANalyzer subsystem
:MARKer[:NORMal]:NPEak
This command moves the marker to the next peak of the spectrum analyzer’s measurement trace.
Syntax
SAN:MARK:NORM:NPE
Screen/field equivalent
SAN:MARK:NORM:NPE controls the Marker To, Next Peak field on the Marker menu of the SPEC ANL screen when Norm/Delta field is set to Norm on the Marker controls menu.
:MARKer[:NORMal]:NPLevel <real number> :MARKer[:NORMal]:NPLevel?
These commands set/query the level of the next peak signal.
This command utilizes the “Real Number Setting Syntax” on page 299, but does not use the :STATe command.
Syntax
SAN:MARK:NORM:NPL <real number>
SAN:MARK:NORM:NPL?
Screen/field equivalent
SAN:MARK:NORM:NPL controls the Level field on the SPEC ANL screen when Norm/Delta field is set to Norm on the Marker controls menu.
:MARKer[:NORMal]:PEAK
This command moves the marker to the highest peak of the signals on the spectrum analyzer display trace.
Syntax
SAN:MARK:NORM:PEAK
Screen/field equivalent
SAN:MARK:NORM:PEAK controls the Marker To, Peak field on the Marker menu of the SPEC ANL screen when Norm/Delta field is set to Norm on the Marker controls menu.
Chapter 1 | 319 |
