Agilent Technologies E6380-90073 manual TRIGgerRESet, TRIGgerSENSe string TRIGgerSENSe?

GPIB Command Dictionary

OSCilloscope subsystem

:TRIGger:RESet

This command triggers an oscilloscope measurement.

Syntax

OSC:TRIG:RES !triggers the oscilloscope

Screen/field equivalent

OSC:TRIG:RESet controls the Reset field on the Trigger menu of the SCOPE screen.

:TRIGger:SENSe <string> :TRIGger:SENSe?

These commands set/query the desired edge of the trigger. ‘Pos’ triggers the measurement on the positive-going edge of the input signal. ‘Neg’ triggers on the negative-going edge.

Syntax

OSC:TRIG:SENS ‘Pos’

‘Neg’

OSC:TRIG:SENS?

Screen/field equivalent

OSC:TRIG:SENS controls the Pos/Neg field on the Trigger menu of the SCOPE screen.

:TRIGger:SOURce <string> :TRIGger:SOURce?

These commands set/query the source of the trigger.

Syntax

OSC:TRIG:SOUR ‘Internal’

‘Ext(TTL)’

OSC:TRIG:SOUR?

Screen/field equivalent

OSC:TRIG:SOUR controls the Internal or the Ext (TTL) field on the Trigger menu of the SCOPE screen.

294 Chapter 1