GPIB Command Dictionary
MEASure subsystem
:CANalyzer:ERRor:FREQuency <meas cmnd> :CANalyzer:ERRor:FREQuency?
These commands set/query the frequency error measurement.
This measurement utilizes the Number Measurement Syntax, but does not use the :METer command.
Syntax
MEAS:CAN:ERR:FREQ <meas cmd>
!See “Number Measurement Syntax” on page 283. MEAS:CAN:ERR:FREQ?
Example
MEAS:CAN:ERR:FREQ?
Screen/field equivalent
MEAS:CAN:ERR:FREQ? reads the Frequency Error measurement field on the CDMA ANALYZER screen. This measurement is also displayed on the CDMA GENERATOR screen.
:CANalyzer:ERRor:MAGNitude <meas cmnd> :CANalyzer:ERRor:MAGNitude?
These commands set/query the magnitude error measurement.
This measurement utilizes the Number Measurement Syntax, but does not use the :METer command.
Syntax
MEAS:CAN:ERR:MAGN <meas cmd>
!See “Number Measurement Syntax” on page 283. MEAS:CAN:ERR:MAGN?
Example
MEAS:CAN:ERR:MAGN?
Screen/field equivalent
MEAS:CAN:ERR:MAGN? reads the Magnitude Error measurement field on the CDMA ANALYZER screen. This measurement is also displayed on the CDMA GENERATOR screen.
220 | Chapter 1 |
