WARNING | Whenever it is likely that the protection has been impaired, the |
| instrument must be made inoperative and be secured against |
| any unintended operation. |
| If this instrument is to be energized via an autotransformer (for |
| voltage reduction), make sure the common terminal is |
| connected to the earth terminal of the power source. |
| If this product is not used as specified, the protection provided |
| by the equipment could be impaired. This product must be used |
| in a normal condition (in which all means for protection are |
| intact) only. |
| No operator serviceable parts in this product. Refer servicing |
| to qualified personnel. To prevent electrical shock, do not |
| remove covers. |
| Servicing instructions are for use by qualified personnel only. |
| To avoid electrical shock, do not perform any servicing unless |
| you are qualified to do so. |
| The opening of covers or removal of parts is likely to expose |
| dangerous voltages. Disconnect the product from all voltage |
| sources while it is being opened. |
| Adjustments described in the manual are performed with |
| power supplied to the instrument while protective covers are |
| removed. Energy available at many points may, if contacted, |
| result in personal injury. |
| The power cord is connected to internal capacitors that my |
| remain live for 5 seconds after disconnecting the plug from its |
| power supply. |
| For Continued protection against fire hazard, replace the line |
| fuse(s) with T 250 V 5.0 A fuse(s) or the same current rating and |
| type (for example, normal blow or time delay). Do not use |
| repaired fuses or short circuited fuseholders. |
34