GPIB Command Dictionary
CONFigure subsystem
:SPOR9SPORT9SB9SP9:MODem:SECurity:PASSword
:SPOR9SPORT9SB9SP9:MODem:SECurity:PASSword?
This command sets/queries the password required by a security challenge when the CONF:SPOR9:MOD:SEC:STAT ‘On’ command is used.
Syntax
CONF:SPOR9:MOD:SEC:PASS <string>
CONF:SPOR9:MOD:SEC:PASS?
Screen/field equivalent
CONF:SPOR9:MOD:SEC:PASS controls the Pssword field on the MODEM CONFIGURE screen when the Serial Port field is set to Port 9.
:SPOR9SPORT9SB9SP9:SINSINP <string> :SPOR9SPORT9SB9SP9:SINSINP?
These commands set/query the destination of data characters received by the Test Set via the SERIAL 9 port.
Syntax
CONF:SPOR9:SIN ‘Inst’
‘IBASIC’
CONF:SPOR9:SIN?
Screen/field equivalent
CONF:SPOR9:SIN controls the Serial_9 In field of the I/O
CONFIGURE screen.
:SPOR9SPORT9SB9SP9:STATus:LINE?
This command queries the line status register.
Syntax
CONF:SPOR9:STAT:LINE?
Screen/field equivalent
No screen/field equivalent.
174 | Chapter 1 |
