Agilent Technologies E6380-90073 manual CDANalyzerMARKerLEVel meas cmnd CDANalyzerMARKerLEVel?

GPIB Command Dictionary

MEASure subsystem

:CDANalyzer:MARKer:LEVel <meas cmnd> :CDANalyzer:MARKer:LEVel?

IS-95 Only mode. These commands set/query the level at the marker on the code domain analyzer’s trace during power or fast power measurements (see :CDAN:MEAS on page 124). This measurement is made relative to the value at Walsh Code 0.

This measurement utilizes the Number Measurement Syntax, but does not use the :METer command.

Syntax

MEAS:CDAN:MARK:LEV <meas cmd>

!See “Number Measurement Syntax” on page 283. MEAS:CDAN:MARK:LEV?

Example

MEAS:CDAN:MARK:LEV?

Screen/field equivalent

MEAS:CDAN:MARK:LEV? reads the Lvl field on the Marker menu of the CODE DOM screen when a power or fast power measurement is selected, and the Ch pwr unit field on the CD Setup menu is set to Rel. This applies when the CDMA standard is set to “IS-95 Only”.

Chapter 1 229