Agilent Technologies E6380-90073 manual Ampstacsdataam real number AMPSTACSDATAAM?

GPIB Command Dictionary

AFG2ENCoder subsystem

:AMPSTACS:DATA:AM <real number> :AMPSTACS:DATA:AM?

These commands set/query the data level when the AFG2:DEST ‘AM’ command is used first. The data level units are %.

This command utilizes the “Real Number Setting Syntax” on page 299.

Syntax

AFG2:AMPS:DATA:AM

AFG2:AMPS:DATA:AM?

Screen/field equivalent

AFG2:AMPS:DATA:AM controls the Data Level field when AFGen2 To field is set to AM on the SIGNALING ENCODER screen when the Mode field is set to AMPS-TACS.

:AMPSTACS:DATA:FM <real number> :AMPSTACS:DATA:FM?

These commands set/query the data level when the AFG2:DEST ‘FM’ command is used. The data level units are kHz.

This command utilizes the “Real Number Setting Syntax” on page 299.

Syntax

AFG2:AMPS:DATA:FM

AFG2:AMPS:DATA:FM?

Screen/field equivalent

AFG2:AMPS:DATA:FM controls the Data Level field when AFGen2 To field is set to FM on the SIGNALING ENCODER screen when the Mode field is set to AMPS-TACS.

Chapter 1 77