GPIB Command Dictionary
DECoder subsystem
DECoder subsystem
:ARM:MODE <string> :ARM:MODE?
These commands set/query the measurement arming mode. This command specifies how long you want the analyzer to decode incoming signals.
•‘Single’ tells the analyzer to display the information received during one gate time. Measurements are triggered using the DGAN:TRIG:ARM and retriggered using the same command. To disarm the measurement, use the DEC:STOP command.
•‘Cont’ is used to automatically
Syntax
DEC:ARM:MODE ‘Single’
‘Cont’
DEC:ARM:MODE?
Screen/field equivalent
DEC:ARM:MODE controls the Single/Cont field on the SIGNALING DECODER screens.
194 | Chapter 1 |
