GPIB Command Dictionary

MEASure subsystem

:DEC:NAMP:DTMF:LOW:DISPlay <string> :DEC:NAMP:DTMF:LOW:DISPlay?

These commands set/query the display mode of the low tone in the

DTMF pair.

Syntax

MEAS:DEC:NAMP:DTMF:LOW:DISP ‘Freq’

‘Frq Err’

MEAS:DEC:NAMP:DTMF:LOW:ERR?

Screen/field equivalent

MEAS:DEC:NAMP:DTMF:LOW:DISP controls the upper subfield of the Lo Tone field on the SIGNALING DECODER screen when the Mode field is set NAMP-NTACand the Measure field is set to DTMF, and the Channel field is set to Voice.

:DEC:NAMP:DTMF:HIGH:FREQuency:ABSolute <meas cmnd> :DEC:NAMP:DTMF:HIGH:FREQuency:ABSolute?

These commands set/query the frequency of the high tone in the DTMF pair. The MEAS:DEC:NAMP:DTMF:HIGH:DISP ‘Freq’ command must be used to display the absolute frequency of the high tone.

Syntax

MEAS:DEC:NAMP:DTMF:HIGH:FREQ:ABS

!See “Multiple Real Number Setting Syntax” on page 282

MEAS:DEC:NAMP:DTMF:HIGH:FREQ:ABS? !returns up to 19 real values

Screen/field equivalent

MEAS:DEC:NAMP:DTMF:HIGH:FREQ:ABS? reads the Hi Tone column on the SIGNALING DECODER screen when the Mode field is set NAMP-NTAC, the Measure field is set to DTMF, and the upper subfield of the Hi Tone field is set to Freq, and the Channel field is set to Voice.

268

Chapter 1

Page 268
Image 268
Agilent Technologies E6380-90073 manual DECNAMPDTMFLOWDISPlay string DECNAMPDTMFLOWDISPlay?, Measdecnampdtmfhighfreqabs